FINEST QUALITY FRAME MADE IN THE U.S.A

BY KRAFT TECH

34 Degree Rake. 2 Up Stretch. Works with 200 Tire using Chain or narrow belt or 180 tire using 1.5" belt.

KRAFT TECH 1 1/4" RIGID FRAME FOR BIG TWIN     Part# K16007 OR 496500

These rigid frames have all the rugged good looks of those found years ago but built with the technology of the 21st century. Today's high output engines require the utmost frame strength, as well as good brakes.

These HARDBODY Frames were designed and manufactured with both in mind. Made to fit Panhead, Shovelhead or Big Twin Evolution or aftermarket evo based motors like S&S, Revtech, & Ultima.  A Manufacturer's Statement of Origin is included.

* 1 1/2" O.D. Drawn Over Mandrel (DOM) .188" wall tubing for backbone strength
* 1 1/4" O.D. Drawn Over Mandrel (DOM) .120" wall tubing for cradle and tail strength
* Additional clearance built-in at backbone for Evolution style engine with up to .200" taller cylinder/head length.         
* Will accept 4 ,5, or 6 speed transmissions
* TIG welded on all new hardened tooling for the most accurate fit possible
* Dual gussets at front & rear motor mounts and at transmission mounts
* Boxed lower seat post mount
* Welded on exhaust hanger mount
* Fully machined hour glass style steering neck
* Fork lock tab
* Softail style seat front mounting tab
Softail Coming
Click Picture